REDUCED TO SALE QUICKLY!!!!I have 1 F-3RR PROCHARGER. Like new! Have mounting plate and brackets, 2 large Red blow-off valves, V-band clamps, pulleys 54,56,58,62, and many belts.....want to sell as a complete package.....ALL for $4,200.00 or reasonable offer!
Bought in June, New 16 volt Powermaster battery (bought 2 and only need 1 now)paid $199.00 thru Summit...sell for $150.00
Tilton Super starter 12-16V for Ford 429-460....$250.00
1 -CS-1 3speed lenco coarse spline with reverse lockout(neutral)... has a 34% and 43% will include ACD shift box with solenoids, air pods, slider kit,new nuetral reverse lockout billet lever, for $3,600.00 shipped within 48 states!!!
1-Newer CS-1 3speed lenco coarse spline with reverse lockout (nuetral) has a 31% and 56%, with air pods.....$3,200.00
Can make somebody a hell of a deal on lenco parts......4-coarse spline gear(43%,25%,38%,41%(has broke planet bearings) sets.....reverser case, 1 slider gear, 1 forward gear, reverse planetaries, coarse spline output shafts), many sprags(10 large sprags, 5 sprag hats and races),races and bearings, forks, 4 maraging shafts, clutch hubs, 2 clutch hats,1 front case, snap rings, o-rings, bearings...etc......$2,800.00 for all...... or gear sets from $600.00...
4- new Brooks 88 rods...7.250" long 1.094" top and 2.375 bottom and 5 Arias 4.375" pistons for brad 4 heads......$300.00
Venolia 6.900" rods with 1.094" tops and 2.200" bottom.....have 1 pass $300.00
Also have 16- 160lb bosch injectors 8 of them have just been back washed and flowed from Kinsler the other 8 have 4 passes.....$45.00 each or set of 8 for $325.00.
Have 1 Accufab 90 mm throttle body...$160.00
Have 2 Procharger belt guards....$150..each
7 -1.6 ratio 3/8 adjusters Stage 5 intake rockers for brad, AJ, or Dart hemi heads....$60 each
Have 1- 72 tooth 8mm RCD crank pulley (standard flange) for Hemi....$200.00
Have 1- 65 tooth 8mm RCD crank pulley (standard flange) for hemi....$150.00
have 1- 64 tooth 8mm RCD crank pulley (standard flange) for hemi...$100.00
New Oberg 600 oil filter and bracket (still in box)....$180.00
1-526" 96TFX Hemi long block, Zero passes since freshened with Brooks 88 rods and J&E pistons, deck is standard, 4.310 bore, 3" main Sonny Bryant crank, Heads are 98 Brad Fuel heads titanium Intake and exhaust, Brand new RCD center flange crank support and gear drive, Hamburger oil pan, billet Keith Black pump, Crane 1" lifters,BLOCK HAS 1 WINDOW AND THERE IS NO INTAKE, VALVE COVERS, PUSHRODS, AND ROCKERS ARE PARTIAL COMPLETE! .....$26,000.00
3 sets of Goodyear 33x10.5Wx15 slicks......(2 set are used with minimal passes $200/pr and 1 set is new $500.......
Weld Draglites 15"x12" dual bolt pattern and 15"x4" dual bolt pattern....$375.00
May call 254-624-1495 Billy |